Pipe cutting and bevelling machine

COPIER invented a stationary machine for industrial use that is capable of length measuring, cutting and bevelling metal pipes.
the machine exists of three segments; an infeed conveyor, the cut and bevel machine and an outfeed conveyor for the pipes.
on the infeed conveyor you put a metal pipe of for example 12 meter long, this pipe is feeded in to the clampingset of the pipe cutting and bevelling machine, the pipe is clamped and length measured by a device according to the length that has been set by the operator.
at for example 3 meters length the first cut is made by a cutting bit.

the cutting is done by a CNC controlled software during the cutting process it preforms the bevel on both ends of the machine.
when finised all parts that are cutted and bevelled are process and feeded onto the outfeed conveyor from where the pipes can further be transported inside the pipe mill or factory.

pipe cutting and beveling is a important and time consuming activity in pipe spool factories, that is why COPIER invented a machine to combine the two activities and have in this way a higher output because less internal handling is required compared to fist saw the pipe and later on bring them to the beveling station.

visit our website www.bevelmachines.com for more information about our pipe cutting and bevelling machine, the product name for this machine is the BEAVER CB-serie.

this Beaver CB-serie is a really efficient productionline and belongs to the pipe mill machinery or pipe spool fabrication workshop.

you can also contact us by email on sales@copierbv.com

or call us on +31183441313

COPIER B.V
bedrijvenstraat 13
4283 JJ Giessen
The Netherlands

telephone : +31-183441313
email : sales@copierbv.com

website:
www.bevelmachines.com