Beaver 3 S, tube bevelling machine
Beaver 3S, tube bevelling machine
Our 3 inch tube bevelling machine bevels tubes and pipes from outside diameter 0.5 up to 3 inch.
This stationary machine has a lever to operate the clamping, the pipe stop and feeding by moving the lever to the left. This small bevel machines for tubes is stationary and could be used in the factory in a fixed position. The machine could be purchase with a table frame or without it. Bevelling tubes with the Beaver 3S machine is a matter of seconds when you installed the tool holders in the right way to get the right angle on the tube end. If the set of the tooling is done that machine is very efficient and fast in use. The machine has a another feature which is the fact that the engine is made stepless, therefore easiliy the gears could be adjusted to get the right cutting speed for bevelling different material.
Copier Bevelmachines is manufacturer and engineer of all our pipe cutting and bevelling machinery.
Contact us for more information or send us your inquiry on email@example.com
Of course you could contact us for your questions by phone as well on +31-(0)183441313