Copier Bevelmachines manufactures besides there axial feeded pipe bevelling machines also CNC machining centres that can machine the Inside diameter and the outside diameter of the metal pipe.

These machines offer CNC machining based on radial and axial feeding on the chuck, they work more or less like a turning lathe to machine one end of the metal pipe. All common shapes that you have in your pipe fabrication work are preset in the CNC software and the machine is CNC cutting the material from outside to the inside of the pipe during this cutting or machining process the shapes are preformed according to the settings. Our machines have a clamping set on the frame of the machine where the metal pipe is clamped the chuck with its radial and axial feeding is doing all the machining and the pipe end. There a main advantages of our CNC machining centres for pipes are that all the shapes of the machining for the ID and OD are pre-set in the software another advantage is that there is no real maximum wall thickness on the machine because it cuts from outside to inside. The CNC machine can do pipe bevelling, tapering, facing, squaring and inside and outside machining.

Compared to a turning lathe our machine have the advantage that there is no maximum to the length of the pipe because we work from one side only and the pipe can be supported by a pipe conveyor.

Watch the video of our 6” to 24” cnc machining centre that we manufactured and supplied based on a customer’s needs and wishes.

Contact us for more information on our CNC machining centres or so called CNC pipe bevelling machines on our email address: sales@bevelmachines.com or call us during working hours on +31-18344113

We have our own engineering department and factory where we manufacture our machinery. Our company is situated in Holland about one hour south of Amsterdam. We focus on offer machinery for the metal pipe fabrication industry.